When decorating, have you ever thought about how to layout it? If so, there should be curtains, pillows, rocking chairs, wall lamps, etc. How to install the wall lamp? How to install the wall lamp is a technical work, so you need to ask a professional craftsman to deal with it. If you have electrician knowledge, you can also install it yourself, but you must pay attention to safety and read the relevant regulations beforehand. So, how to install the wall lamp? Let's take a look.
When decorating, have you ever thought about how to arrange it? If so, there should be curtains, pillows, rocking chairs, wall lamps, etc. How to install the wall lamp? How to install the wall lamp is a technical work, so you need to ask a professional craftsman to deal with it, if there is an electrician You can also install it yourself, but you must pay attention to safety and read the relevant regulations beforehand. Then, how to install the wall lamp? Let’s take a look.
How to install the wall lamp
(1) The installation height of the wall lamp must slightly exceed the height of the eye level by about 1.8 meters. The illuminance of the wall lamp cannot be too large. Mainly based on auxiliary lighting and decoration effects.
(2) First determine the height of the room. The installation height of the wall lamp is higher than the line of sight, which is about 1.8 meters. The height of the wall from the light to the working surface is 1440-1850, and the height from the ground to the ground is 2240-2650.
(3) The distance from the bedroom wall lamp to the ground can be very close, about 1400-1700 mm. The wall distance of the wall lamp is also very close, between 95-400 mm, comparing the specific size and actual situation.
Details of wall lamp installation
(1) According to the hole on the wall light board, mark the position of the expansion screw on the wall and combine the installation drawing to accurately measure the data to avoid errors.
(2) Use an electric drill to drill holes where the marks are made on the wall. Know the wiring layout in advance, do not drill into the wires, and master the depth of the hole.
(3) After opening the hole, start to tighten the expansion screw. First, push the expansion screw into the hole that has been opened, and then use a hammer or something to drive the expansion screw into the wall until it disappears in the wall.
(4) Pass the wood screw through the hole for wall lamp wall hanging, and fix it on the expansion screw and tighten it. The fixing on both sides is carried out alternately to play a stabilizing role to avoid dislocation of the wood screws.
(5) Connect the hanging plate and the suction cup with screws, and tighten the head screws to firmly fix the suction cup. Finally, cut off the indoor power supply, connect the wire and power cord of the wall lamp, and finally install the wall lamp.
(6) The installation method of the wall lamp is relatively simple. Generally, after the position is determined, the wall lamp socket is fixed, and then the wall lamp is fixed on the wall with embedded materials or perforations.
(7) The wire connecting the wall lamp is easy to match the paint color of the wall color. In order to keep the wall clean, you can choose a bright color. Dig a small groove in the wall that can fit the wire tightly, insert the wire, and then bury it flat with lime. Please pay attention to the railway plan. Use a straight line as the center without bending, and paint the same color as the wall.
The above is about how to install the wall lamp. This article explains the installation process. There are roughly two parts. After you take out the installation dimensions, you will understand their importance. The measurement must be accurate and make no mistakes. How to install the wall lamp, in addition to the basic installation details, it can also be coordinated with the indoor combination, plan ahead, and complete the later construction.
